73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => The Lows (Lowering/Drops) => Topic started by: Lowhoe775 on November 11, 2014, 08:56:25 pm
-
Just got some drop spindles and I want to know where I need to grind on the brake caliper to clear. This is what I have read in reviews and forums but I see no pictures. Anyone have a picture that might give me an idea I just don't want to go to put them on and start to scratch my head.
I got the djm 3"drop spindles part# DS2045H-3 thanks in advance
-
A lot depends on the wheels you are using.There is another thread on this.
http://forum.73-87chevytrucks.com/smforum/index.php?topic=12304.0;topicseen
-
A lot depends on the wheels you are using.There is another thread on this.
http://forum.73-87chevytrucks.com/smforum/index.php?topic=12304.0;topicseen
thanks for the feed back I just went to install the other night and found out that these spindles were for 1" thick rotors made me mad since I bought locally from Craig's list and now I'm trying to sell or trade them for 1.25" rotors o well lesson learned
-
If I had it to do over I think I would go with 2 inch spindles and a 1 inch spring.Sorry to here about the craigs list deal
-
If I had it to do over I think I would go with 2 inch spindles and a 1 inch spring.Sorry to here about the craigs list deal
I will think about it thank you I will post up a picture once I determine what I will do