73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: jntrndrm on December 18, 2014, 08:00:46 am

Title: Pic's of eng vacuum lines needed
Post by: jntrndrm on December 18, 2014, 08:00:46 am

I'm trying to put my truck together, and could use some pic's of the vacuum lines for a 1983-4 c10 250 6 cyl, the diagrams I've found aren't  the best, and I work better with pic's I have some already done but, alas not all of them. putting 2 trucks together to make one  is keeping me busy. any help with this would be great. Don

Title: Re: Pic's of eng vacuum lines needed
Post by: Captkaos on December 18, 2014, 03:15:43 pm

Have you checked the tech forum section and looked at the GM Manuals?

Chris Lucas
73-87chevytrucks.com
squarebody.biz

Title: Re: Pic's of eng vacuum lines needed
Post by: jntrndrm on December 20, 2014, 04:32:52 am

I've checked the Tech section, didn't find anything, and the manual had a diagram that wasn't very clear to read, there are some metal lines that you can't see in the diagrams.  also a few lines run over the top of each other that aren't clear enough to separate . I'm working out some of them but a couple of pic's would be most helpful.  Don

Title: Re: Pic's of eng vacuum lines needed
Post by: Irish_Alley on December 20, 2014, 06:08:54 am

did you check here? (http://forum.73-87chevytrucks.com/smforum/index.php?topic=25639.0)

Title: Re: Pic's of eng vacuum lines needed
Post by: Stewart G Griffin on December 21, 2014, 09:35:22 am

Wow!  Awesome link.  i didn't know it existed.  Thanks. :)

Title: Re: Pic's of eng vacuum lines needed
Post by: Irish_Alley on December 21, 2014, 05:46:17 pm

keep checking on them they should be easier to read soon along with ones you might not have noticed