73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: michael.francis.5876 on January 18, 2015, 04:33:46 pm

Title: Vent Window
Post by: michael.francis.5876 on January 18, 2015, 04:33:46 pm

1976 Chevy K10. I replaced the leaky vent window on the drivers side. For some reason the bottom of the window has a gap in it that let's air in. I took it back out to make sure the where were in right and that the window was all the way down. I have the washers in correctly as I have the flat one facing forward with a washer on top of the window frame followed by the other 2 washers spring, nut lock and lock. Anyone else experience this?

Title: Re: Vent Window
Post by: Jason S on January 18, 2015, 07:33:13 pm

Could you post a photo?

Title: Re: Vent Window
Post by: VileZambonie on January 18, 2015, 07:34:35 pm

Did you use the correct year vent window?

Title: Re: Vent Window
Post by: michael.francis.5876 on January 18, 2015, 09:06:19 pm

I'll try and get a pic tomorrow. I never replaced the window, just the seal. It is the exact same seal as I took off.