73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Electrical => Topic started by: true74yamaha on January 18, 2015, 06:09:11 pm

Title: Question on 85 k10 door switches
Post by: true74yamaha on January 18, 2015, 06:09:11 pm

So I need new door switches LH & RH. I was looking at replacements. I only see replacements with two terminals like what the LH side uses. Can I use that same one for the RH side that only uses one of terminals?

Title: Re: Question on 85 k10 door switches
Post by: Irish_Alley on January 18, 2015, 09:43:51 pm

what switch window, locks or lights?

Title: Re: Question on 85 k10 door switches
Post by: true74yamaha on January 18, 2015, 10:16:56 pm

Door jamb switches for the lights sorry

Title: Re: Question on 85 k10 door switches
Post by: Irish_Alley on January 18, 2015, 10:29:05 pm

yes im sure the two terminal one is for the left side to connect to the right. wont do it no harm if only one wire is hooked up. its just cheaper to make one than to make two different styles

Title: Re: Question on 85 k10 door switches
Post by: true74yamaha on January 19, 2015, 02:03:58 pm

Very true thanks hopfully that fixes my curt lights. Those door jamb switches were pretty rusty.   

Title: Re: Question on 85 k10 door switches
Post by: ackland3 on January 19, 2015, 09:52:12 pm

I had a busted wire on mine from the fuse to the dome light in 3 places took forever to track it down. I"d check that too