73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: MEXICANKAMIKAZE on March 18, 2015, 12:56:43 am
-
so i have a 79 c20 and im having problems with the turn signals. whenever i pull the lever for left or right the front indicators work fine but the back lights trigger the hazards whenever i turn for left or right? any ideas? could it be blown out fuses or the actual lever itself
-
so when you turn on the left or right both sides light up on the rear almost like you have hazards on?
-
yes exactly what happens
-
i would think a ground but normally a bad ground will cause more problems than just one bulb screwing up. when you put the turn signals on do you have brake lights? how bout running lights?
-
yes my brakes still work when i have them on
-
You going to have to trace the wires something is getting crossed up. What happens when you turn on the hazzards?
-
i just got the truck and the interior is awful and i cant figure out where the hazards button is
-
It should be on the passenger side of the steering column, behind and below the key.
-
yea i dont have a hazard botton
-
is there a hole in the column about 4 o'clock?
-
(http://ww2.justanswer.com/uploads/dt69nova/2011-03-04_144141_pic1.jpg)
maybe here
-
forgot my password but are you pointing at where your screwdriver is?
-
nope the little knob on the side of the steering column that says "hazard" about in the 4 o'clock position
-
oh ok there is no hazard knob at all but there is a hole and i stuck a screw in there so i can function it and when i push it in i my turn signals completely stop working
-
A lot of this is run thru. The turn signal controller
The white doughnut looking deal the lever screws in
I'd replace that first
Its about $25 at any auto parts store
Next I'd replace the bulbs and double check the wiring
See if you're getting power to the light socket
Sent from my iPhone using Tapatalk
-
yea the turn signal has all kinds of pink stuff glued into idk why but im going to the parts store now to get some tools probably get that part as well
-
well im going to autozone now tobuy the part ill probably get some fuses since it looks like im missing a few. is it hard to change these out any one know???
-
so i replaced the turn signal and i noticed the fuse box was missing the 4 wat flasher fuse so i replaced that and all the fuse look good but the proble is still there could the wires be mixed in the back???