73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Electrical => Topic started by: Boxchevrolet on March 29, 2015, 12:42:47 pm
-
hello i am new to the forum and i just bought a 83 chevy k10 350 and i opened the hood and on the driverside firewall where the fuse box is there is connectors that arnt connected to anything, can someone tell me what these connectors go toß
-
Some might be for options not installed on your particular rig (?) Why not take a picture and post it here, some of these guys will probably know it exactly.
-
heres a picture
-
Do you have a wiper motor/washer pump installed? The 2 in your hand look to be for the wiper motor and washer pump, they should be 1 unit with 2 plugs.
-
idk if they are installed, there is nothing near them for them to plug in to. could you put a picture of what they are support to go to?
-
The plastic square box that has all the wiring going into it is the firewall fuse box harness, the washer pump/wiper motor should be directly above it, between the brake booster and inner fender. I don't have a pic on my phone.
-
thankyou apparently the truck doesn't have a windshield wiper motor , now on another note when i turn on my headlights the fuel guage move to below E, otherwise it shows the correct amount of fuel, do you have any idea what could be causing that?
-
Here is the wiper motor and plugs, there are 3. These should clear things up for you.
(http://tapatalk.imageshack.com/v2/15/03/29/125433227d03783e627e5fa56a6310c1.jpg)
(http://tapatalk.imageshack.com/v2/15/03/29/83d21a6c2787aca27623b202853bceae.jpg)
(http://tapatalk.imageshack.com/v2/15/03/29/3b470017b739f9da1c5784aeb3257040.jpg)
As for your headlight question, I'de say best check the grounds first.
-
thanks man
-
Welcome.