73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: 77sierra454 on May 10, 2015, 09:26:09 pm
-
I have a 77 C25 regular cab, long box pickup. It looks like it "peaks" in the center where the cab meets the bed. I have replaced all the cab bushings hoping that would level it out, but it has not. I measured from the ground to the body line that runs from front to back of the truck and the back of the cab sits about 1/8 to 3/16 higher than at the front of the bed. Has anyone else dealt with this? Can I take 1/8 of an inch out of the rear bushing sleeves to get it to sit lower in the back? Any thoughts? Thanks
-
Install shims under the front clip and front cab mounts. That's assuming the mounts are in good shape and don't need replacing.