73-87chevytrucks.com
General Site Info => Welcome => Topic started by: BigBruceBakerMT on May 26, 2015, 05:03:59 pm
-
I'm just getting started on this site so thought I would drop in here to say hello to everyone.
Long story short my Papaw (grandpa) passed away a few years ago, and after a long time seeing barely any use from the family back east I had his 1986 Scottsdale step-side shipped out to Montana.
I've got a ton of questions that I'm hoping some of you can answer and help me with. I'll try and find the right forum's and if I put stuff in the wrong place just yell.
Here's the pickup.
I think its a k10 because it is a 4wd, however all the paperwork has that it is a c10, so not sure on that.
-
Perfect so far, Welcome from NW Indiana. There is a section to put everything in and if you're not sure there is a section for that as well. Nice stepper.
-
Welcome from NV, thats a good lookin truck
-
Howdy and welcome from Kansas!
-
awesome looking truck! Welcome from Va
-
Welcome from Northern Illinois. Very nice unit.
-
welcome from maryland. try your best to put things in the right spot but if you do mess up we will move it for you no yelling needed ;). but yes a 4x4 should be a k10, some people put 4x2 cabs on a 4x4 frame nothing wrong with that. the vin should tell you what it came as from the factory.
http://www.73-87chevytrucks.com/techinfo/73-91VIN/1986truck.pdf
-
Welcome from California. It looks like a 4wd from the pic. Does it have a front differential? The front wheels look like they have the locking hubs.
-
Welcome from AZ.
-
Someone also could have switched the Vin