73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: hondarider188 on June 11, 2015, 11:20:25 pm

Title: A/C Brackets
Post by: hondarider188 on June 11, 2015, 11:20:25 pm

I have a 1983 k10 with a 5.7L and it came with factory A/C in the truck but the last owner was the one that put in the 350 and he failed to transfer the A/C brackets with the block. and i have been able to find all the brackets excepts for the top bracket that you can adjust to tighten the belt. i've been to the local junk yards with no luck. does anyone know where i can find one and the braces that bolt to the compressor. Thanks

Title: Re: A/C Brackets
Post by: LTZ C20 on June 14, 2015, 03:36:14 pm

Check resto parts suppliers.

Title: Re: A/C Brackets
Post by: 78 Chevyrado on June 15, 2015, 09:33:06 pm

sounds like a junkyard part to me

Title: Re: A/C Brackets
Post by: Jason S on June 16, 2015, 08:30:06 am

Ebay

Title: Re: A/C Brackets
Post by: hondarider188 on June 27, 2015, 11:43:14 am

I finally found a truck that a guy is willing to part out. He says it has all the brackets i need. But the issue is that is truck in a 1987.  I havnt seen the truck. So will the brackets be the same?

Title: Re: A/C Brackets
Post by: roundhouse on June 27, 2015, 04:21:50 pm

Depends on what kind of compressor it has

They used two different kinds


Sent from my iPhone using Tapatalk

Title: Re: A/C Brackets
Post by: hondarider188 on June 27, 2015, 10:45:08 pm

He says its a r4 compressir which is what i need