73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Wheels & Tires => Topic started by: Marty on July 10, 2015, 12:43:03 pm
-
I used to have a 70 F100 and the 20 inch dodge spares would fit. Are there any factory 20 inch wheels out there that will fit the 77 C10. I know it's a 5x5 pattern but I'm not having any luck searching the web. Thanks guys.
-
I guess the best question is why you want 20" rims in the first place
In a 2WD that's gonna leave you with hardly any sidewall
Almost Any factory 20" rim is going to be late model. Which means
It's going to have the wrong offset. Which is going to push the rims too far under the truck
Sent from my iPhone using Tapatalk
-
I like lowering trucks and the larger diameter wheel looks nice to me. Especially on a step side. Just wondering if you guys had any experience with this. I may have to pay up and go aftermarket if no other auto maker offers any factory 20s in the C10 bolt pattern.
-
I've seen em at car shows
No idea what brand of wheel
I'd think you're gonna have to buy aftermarket to get the correct offset
Sent from my iPhone using Tapatalk
-
Yup, thats a big rim. I prefer the grandpa look, 15x6 original steel rims, hub caps and white walls! Amen
Sent from my iPhone using Tapatalk
-
If you are looking for stock wheels, the newer Silverado's have a high positive offset, so get some adapters to change from 5x5 to 6x5.5 to get the backspacing you need.
-
I will check that, thanks.
-
Jeep wranglers use 5x5, so if you can find 20s for a jeep wrangler they will likely work (jeeps usually have similar offset)