73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: enaberif on August 06, 2015, 10:23:10 pm
-
Anyone think these would work for a 4x4 K10? Guy only wants $50 for them.
(http://i.ebayimg.com/00/s/NjAwWDgwMA==/z/zr0AAOSwl8NVeiHV/$_27.JPG)
-
What car where they in before?
-
the guy has no idea. they were given to him and just wants to get rid of them
-
They could be off of anything.
-
Can he see any part numbers stamped on them? Then you could look up the part and see what it fits
-
LOL. I didn't think trying to get an answer to this was going to be possible. I'm going to be looking at them tonight regardless and make a final call. Just thought maybe someone could tell visually if they could work.
-
if they dont fit you could prob heat them up and make them fit
-
I found a website that seems to be what they are. It looks like they could be these... http://www.lonestarperformance.com/index.php?route=product/product&product_id=202
What has been mentioned those is because of the curve of the #4 it MIGHT cause issues. But it seems to be back far enough it should clear anything.
-
Here they are:
http://www.amazon.com/Hooker-Headers-2466-UNIVERSAL-SHORTY/dp/B000JKAM8G
-
I found a website that seems to be what they are. It looks like they could be these... http://www.lonestarperformance.com/index.php?route=product/product&product_id=202
What has been mentioned those is because of the curve of the #4 it MIGHT cause issues. But it seems to be back far enough it should clear anything.
Wow. Here's a pic showing both sides of the Flowtech 11100. They and the Hooker 2466 look like one is a copy of the other. Hard to tell without seeing the nameplate on the header.
http://www.jegs.com/i/Flowtech/387/11100/10002/-1?CAWELAID=1710709241&CAGPSPN=pla&catargetid=230006180000850239&cadevice=c&gclid=CL7az-jvl8cCFYVAaQod8zEBQg
-
I found a website that seems to be what they are. It looks like they could be these... http://www.lonestarperformance.com/index.php?route=product/product&product_id=202
What has been mentioned those is because of the curve of the #4 it MIGHT cause issues. But it seems to be back far enough it should clear anything.
Wow. Here's a pic showing both sides of the Flowtech 11100. They and the Hooker 2466 look like one is a copy of the other. Hard to tell without seeing the nameplate on the header.
http://www.jegs.com/i/Flowtech/387/11100/10002/-1?CAWELAID=1710709241&CAGPSPN=pla&catargetid=230006180000850239&cadevice=c&gclid=CL7az-jvl8cCFYVAaQod8zEBQg
Yeah seems to be a fairly generic SBC long tube header. Hopefully the nameplate is still on them.
-
Wow. Here's a pic showing both sides of the Flowtech 11100. They and the Hooker 2466 look like one is a copy of the other. Hard to tell without seeing the nameplate on the header.
http://www.jegs.com/i/Flowtech/387/11100/10002/-1?CAWELAID=1710709241&CAGPSPN=pla&catargetid=230006180000850239&cadevice=c&gclid=CL7az-jvl8cCFYVAaQod8zEBQg
Hooker and Flowtech are owned by the same company, Holley, so I'm sure alot of the stuff the manufacture is the same design and just different materials or quality level
-
Flowtech is the cheap version of hooker. Much like blue point is the cheap version of snap on.
-
well I got them.. $40 later. will take pics later as they need a cleqning
-
Cool