73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Electrical => Topic started by: Karmageddon on August 12, 2015, 06:04:09 pm
-
Ok I have searched the forums and have found nothing that will help my situation. I have an 87 Chevy V10. It sat for a couple years and now I am driving it again. My issue is that the wipers do not work at all. Turn the switch on nothing happens. I have checked the fuse and that is good. I am getting power to one wire at the wiper motor.
My thought was to eliminate the switch on the column and put in a 3 way toggle switch. I have looked at the wiring diagrams for my truck posted on here. I cannot gather enough information from them to figure out how I would wire in a toggle switch though.
-
The dash switch controls wiper motor ground. Disassemble and clean the ground connections to cab sheetmetal under the dash next to the park brake pedal.
-
I'll try that but I don't have a dash switch. It is on the column with the turn signal.
-
Both dash- and column-mounted switches control the wiper motor ground. Does the truck have delay wipers?
-
I wish lol