73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: Kallaorf on September 29, 2004, 01:29:00 am

Title: Check this out!
Post by: Kallaorf on September 29, 2004, 01:29:00 am

I have an 86 c-10 pickup...the parallel run between the bottom of the rear window and the front of the bed rail is off, as much as 3/4 inch on the passenger to the driver side. Ive seen other C-10's like this and was wondering if there is a fix for it. My body lines on the side are dead on, and I had the frame checked for straightness before bagging it.

Thanks in advance.....Bro

Edited by: Kallaorf at: 9/29/04 12:29 am

Title: Re: Check this out!
Post by: bigblock73 on September 29, 2004, 12:05:00 pm

Are your cab mount bushings shot or on backwards (if they are new)?  How about the cab mounts themsleves?

Did you have your V8 today?      

...Jeff

'73 swb 2wd
'77 Blazer 2wd

73-87.com

Title: Re: Check this out!
Post by: Kallaorf on September 29, 2004, 03:00:00 pm

They are stock, and last time I looked they were kinda shot lookin but even. I'll have to check them front ones out. But they most likely need to be replaced by now.

Thanks...Bro

Edited by: Kallaorf at: 9/29/04 2:00 pm