73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => Topic started by: MEXICANKAMIKAZE on September 17, 2015, 12:39:24 am

Title: 1979 c20 350 4 speed 3/4 ton
Post by: MEXICANKAMIKAZE on September 17, 2015, 12:39:24 am

So I've been wanting to lower my truck and I was wondering if it can be done on a 3/4 ton?

Title: Re: 1979 c20 350 4 speed 3/4 ton
Post by: outlaw70nova on September 17, 2015, 10:10:02 am

Absolutely.

Title: Re: 1979 c20 350 4 speed 3/4 ton
Post by: MEXICANKAMIKAZE on September 17, 2015, 12:36:28 pm

Do you know where I can get a kit? Every time I look I get things for 1/2 ton only

Title: Re: 1979 c20 350 4 speed 3/4 ton
Post by: roundhouse on September 18, 2015, 09:52:09 am

I don't think there's any difference


Sent from my iPhone using Tapatalk

Title: Re: 1979 c20 350 4 speed 3/4 ton
Post by: Irish_Alley on September 18, 2015, 07:05:10 pm

Quote from: roundhouse on September 18, 2015, 09:52:09 am

I don't think there's any difference


Sent from my iPhone using Tapatalk

x2

Title: Re: 1979 c20 350 4 speed 3/4 ton
Post by: 1967KaiserM715 on September 18, 2015, 08:08:37 pm

the only difference may be rear springs, 52 or 56 inch, although 56 is rarer to find, more common on 1-tons

otherwise all other parts should be interchangeable with 1/2 ton parts

Title: Re: 1979 c20 350 4 speed 3/4 ton
Post by: MEXICANKAMIKAZE on September 19, 2015, 04:20:14 am

Thanks I'll probably drop it this winter or spring

Title: Re: 1979 c20 350 4 speed 3/4 ton
Post by: Captkaos on September 21, 2015, 11:01:47 pm

All 3/4 ton trucks used 56" springs.

Title: Re: 1979 c20 350 4 speed 3/4 ton
Post by: MEXICANKAMIKAZE on March 01, 2016, 02:34:09 am

Could I cut my front springs?