73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Topic started by: sjay on February 04, 2016, 09:51:53 am
-
Hello everyone,
New member here. I just picked up a 87 gmc 2500 (High Sierra C25). It needs a fair amount of work.The previous owner removed the interior in an effort to restore it. I now have boxes of stuff but no screws!
What are the screw sizes for the guage panel bezel?
What are the screw sizes for the door panels?
Where can i get information on the screw sizes and where can I buy all the screws? I know im also missing the screw retainer clips as well as some plastic clips for the door panels. What did you guys do to replace these screws?
-
Most are #8's of different lengths. You can get the clips/speednuts at most bolt specialty stores. There are sites on the web for the same also. Google makes it happen..... :)
-
Most are #8's of different lengths. You can get the clips/speednuts at most bolt specialty stores. There are sites on the web for the same also. Google makes it happen..... :)
Googled.........http://www.clipsandfasteners.com/default.asp
-
For the screws that have special washers built onto them, I usually head to the junkyard and get some. The dash bezel has them.
My local one has a $2 entrance fee and, generally, allows you to grab a couple hand fulls of screws from vehicles without paying extra.
I would do what you can to get new ones, though I have had trouble getting ones with proper heads locally.