73-87chevytrucks.com
		73-87 Chevy _ GMC Trucks => Electrical => Topic started by: bcstingray on March 26, 2016, 04:52:42 pm
		
			
			- 
				I have installed a 1 wire alternator on my build. Are the stock wires needed for anything else? The wires from the stock alternator I plan to just cut short to clean up the engine compartment. 
			
 
			
			- 
				i know on the race cars we just cut the wires and electrical taped the ends and never had any problems.
			
 
			
			- 
				
i know on the race cars we just cut the wires and electrical taped the ends and never had any problems.
x2 i know on my cummins i put the one wire in but kept the stock pigtail in the trucks wire harness. it saved me for doing this cause i was on vacation and it was the weekend. my one wire alternator crapped out so luckily i left the stock pigtail in place and i went to the parts store and picked up a new alternator. if i didnt keep the wires in place i would of had to wait till monday for an alternator shop to open 
			 
			
			- 
				Your right. I don't know of any auto parts stores that carry one wire alternators. I'll just tuck them up out of the way. 
			
 
			
			- 
				O'Reilly's sells a one wire Delco cased alternator.  
			
 
			
			- 
				
O'Reilly's sells a one wire Delco cased alternator.  
Part# please
			 
			
			- 
				
Part# please
I knew you were gonna ask...  Wilson 90-01-3125
http://www.oreillyauto.com/site/c/detail/WIL0/90013125.oap?keyword=90-01-3125 (http://www.oreillyauto.com/site/c/detail/WIL0/90013125.oap?keyword=90-01-3125)
One of my neighbors put this on his '67 CJ-5.  That Jeep has all sorts of wiring issues, so he used one of these for the simplicity of just hooking up to the positive terminal.
			 
			
			- 
				thank you
			 
			
			- 
				You're welcome. Hopefully those part numbers will save someone a bit of time...