73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Members Rides => Topic started by: Dan75k20 on April 19, 2016, 07:54:21 pm

Title: Just picked this up
Post by: Dan75k20 on April 19, 2016, 07:54:21 pm

Just bought an1987 r10 bell tech spindles and springs flip kit in the rear 6 front 8in rear drop  blown up 305 and 700 r4 is good it came with the 89 k1500. With a good 350 tbi i have a 87 v10 computer and lots of tbi stuff so i should be good to go! My 75 k20needs work  the floors and cab supports along with the inner rockers need replaced and needs body work i have a nice front clip and will paint my 75 blue and silver. (http://uploads.tapatalk-cdn.com/20160420/15cc79ad0fb3ccabf6f1abca6c8cf925.jpg)(http://uploads.tapatalk-cdn.com/20160420/2ae64d2be194d0d23d31348065cbf57e.jpg)(http://uploads.tapatalk-cdn.com/20160420/2992faac4ddfae91522967acd93bb313.jpg)(http://uploads.tapatalk-cdn.com/20160420/014f4c02bc6285f5f6a08f62a2f1a311.jpg)

Sent from my LG-H811 using Tapatalk

Title: Re: Just picked this up
Post by: Dan75k20 on April 19, 2016, 07:55:29 pm

The last picture is the 87r 10 i bought.

Sent from my LG-H811 using Tapatalk

Title: Re: Just picked this up
Post by: Dan75k20 on May 03, 2016, 07:46:33 am

(http://uploads.tapatalk-cdn.com/20160503/ea338624220a6f1cb4e697f0f255e767.jpg)(http://uploads.tapatalk-cdn.com/20160503/e5b7fca74cf8bda92b99350f9deaa0d3.jpg)(http://uploads.tapatalk-cdn.com/20160503/3a406cda9cba42d779228e60118b34a8.jpg)

Sent from my LG-H811 using Tapatalk

Title: Re: Just picked this up
Post by: Dan75k20 on May 03, 2016, 07:47:34 am

I started pulling the donor truck apart last night. For the 350

Sent from my LG-H811 using Tapatalk

Title: Re: Just picked this up
Post by: Dan75k20 on June 25, 2016, 11:24:28 pm

(http://uploads.tapatalk-cdn.com/20160626/e02037d2c1a55d9af02f6ca81e0a7fa0.jpg) i have the 350 out of the donor found out its out of a 95 by the casting number. I have to get it on a stand to change gaskets while its out .I had to move to a new shop and have been busy with work. It is coming along. I am going to pull the bed i have another bed coming. i can sandblast and paint the frame i also have mini c notches for the truck so while its apart why not! Do things right!


Sent from my LG-H811 using Tapatalk

Title: Re: Just picked this up
Post by: Dan75k20 on June 25, 2016, 11:27:59 pm

(http://uploads.tapatalk-cdn.com/20160626/41ac0ce5f315ed408432ea0811b50286.jpg) i also sold the bench seat in favor of the 90s blazer/suburban buckets when install i will do a write up in the interior section of how i mounted them i set them in today(http://uploads.tapatalk-cdn.com/20160626/6e1fd233d4fbc7d8684d509e42842542.jpg)

Sent from my LG-H811 using Tapatalk