73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: Autonutz on May 11, 2016, 10:04:59 pm
-
Short story my holley died and im hoping to throw this Qjet on to get the truck to my new house in a few days...
The Qjet was last running on my old 350 Chev truck so with a little tweaking it should run well enough to get it to its new home.
Ive made a custom fuel line for the threaded fuel line on the Q jet, the holley only had 1 vacuum hose hooked up so I need to find out which others I need to hook up
Im wondering without some of the things on Q jet diagrams such as the canister etc what I would do with the open ports, plug them or leave them open air etc??
-
first the valve cover with the pcv valve needs to be flipped around so the valve is at the front for easy hook up -the hose for the pcv will go to lowest large stem at the front of carb (below the fuel filter housing - the larger one plug for now
the vac advance line can go to the small stem near the front of carb
anything else plug for now to get it home