73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: 86 NH BOWTIE on August 17, 2016, 05:51:13 pm

Title: 86 Pickup Tailgate trim mounting template??
Post by: 86 NH BOWTIE on August 17, 2016, 05:51:13 pm

Hello, very first post, hope its in the right place. I have a 86 k-10 short bed and I have the brushed tailgate trim and am wondering if there is a mounting template available for getting the holes right.

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: LTZ C20 on August 17, 2016, 09:37:11 pm

No template that I know of. You could separate the two halves, mark new holes and put it back together. It will separate, just to be brutal on it, I've separated and re attached them a few times. I would offer to measure mine for you but I'm not in the same place as my truck is.

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: AZ4X4SQBDY on August 17, 2016, 11:17:45 pm

I've got one of those panels in my office and was thinking you could put the screws in backwards or from behind the panel so they are sticking out and then line the panel up and gently scratch the areas that you need to drill the holes.

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: 86 NH BOWTIE on August 18, 2016, 04:32:27 pm

Thanks a lot for the suggestions. After doing a little bit more sizing up, it appears as though the 4 mounting screws may line up dead center in the 4 stamped squares on the inner tailgate. Sort of makes sense. Just working up the guts to drill into a perfect surviving tailgate from 86! I will update no matter how it works out.

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: VileZambonie on August 18, 2016, 05:10:10 pm

Just make a template with a piece of construction paper.

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: 86 NH BOWTIE on August 18, 2016, 05:29:27 pm

Hmm. once again, simplicity wins out over long drawn out math! Good idea, thanks!

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: LTZ C20 on August 18, 2016, 10:17:15 pm

The holes do line up in the center like your thinking just so you know.

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: 86 NH BOWTIE on August 19, 2016, 12:23:34 pm

Thanks for the confirmation LTZ C20!!!

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: LTZ C20 on August 19, 2016, 07:07:49 pm

Welcome. I'll be home in about an hour if you would like me to measure my tailgate.

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: 86 NH BOWTIE on August 22, 2016, 01:29:30 pm

Worked perfectly. all 4 holes are centered within their respective squares. Will post pics. Thanks again!

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: 86 NH BOWTIE on August 22, 2016, 01:44:11 pm

I guess my pics are too big.  :-[

Title: Re: 86 Pickup Tailgate trim mounting template??
Post by: LTZ C20 on August 22, 2016, 01:51:16 pm

Even without pics, it still worked.