73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => The Lows (Lowering/Drops) => Topic started by: cstiles on September 10, 2016, 08:01:47 pm
-
Anybody using them?how do they ride on,the road for a daily and would the ailignment work . I got up under the truck and it looks like id be laying on the bump stops if I used them . looks like id have to cut the bump stops out.and it looks like id maybe 2 inches of wheel travel. but there cheap and I it looks like everybody has problems with lowering spindles rubbing on these trucks
-
Anybody using them?how do they ride on,the road for a daily and would the ailignment work . I got up under the truck and it looks like id be laying on the bump stops if I used them . looks like id have to cut the bump stops out.and it looks like id maybe 2 inches of wheel travel. but there cheap and I it looks like everybody has problems with lowering spindles rubbing on these trucks
I dont have these springs, I have Eibach 2 inch drop progressive rate springs but they gave me a 4 inch drop.
The bump stops can be replaced with smaller ones.
The spindle issue it more towards 15X8 wheels with 4 inch backspacing. If you have the 7 inch rally your fine.
-
I have the 8 inch wide rallys. So 2 inch spings gave u a 4 drop? I figured drop springs might be off a little but that's crazy
-
I have the 8 inch wide rallys. So 2 inch spings gave u a 4 drop? I figured drop springs might be off a little but that's crazy
Yeah im not sure why they did, but they did. Ride is solid.