73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: bigfosty on September 12, 2016, 06:03:57 am
-
Looking for the metal caps that go over the hub on my 75 k10. It has the np203 transfer case (that's the all wheel drive version) and I can't seem to find the caps anywhere? Maybe I am calling them the wrong name, any ideas? Thanks in advance.
-
Unless you can find a good used set, clean up/paint the old ones and reinstall as they don't sell those aftermarket. I ended up using manual locking hubs when mine deteriorated. Will have to keep those in the lock position. Good luck.
-
like automatic hubs? i think ive only seen the dust cover types on something like a jeep. do you have a picture?
-
like automatic hubs? i think ive only seen the dust cover types on something like a jeep. do you have a picture?
I believe bigfrosty is looking for the front axle cap that would be on a full time setup (i.e., no locking hubs).
Should look something like in the photo.
These show up, used and new, on ebay.
-
There's a set on eBay around 30$
-
Actually quite a few # 6259156