73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: David A Young on October 07, 2016, 01:43:10 pm

Title: 700r4 tv cable bracket
Post by: David A Young on October 07, 2016, 01:43:10 pm

Ok I'm having a cable issue on my 85 c 1500. I recently installed a Edelbrock 2104 manifold with a q jet carb. My truck originally came out with a 350 c lockup. Is there any differences between the factory 350 c throttle brackets and the factory 700r4 throttle bracket? I'll post a pic of the problem I'm having. If I have to have an aftermarket brakxet what would everyone recommend?

Title: Re: 700r4 tv cable bracket
Post by: Irish_Alley on October 08, 2016, 07:25:10 am

http://forum.73-87chevytrucks.com/smforum/index.php?topic=33806.0
this give you any ideas

Title: Re: 700r4 tv cable bracket
Post by: David A Young on October 10, 2016, 09:17:47 am

Are the factory brackets the same? If they aren't I'll go aftermarket. Still want to keep the set up for cruise control of I can

Title: Re: 700r4 tv cable bracket
Post by: gwcrim on October 13, 2016, 09:55:32 am

Im certainly no expert but I'd  be willing to bet that they are different.  There is a lot of info on TV cables all around the internet.  Take some time to Google and read.

Title: Re: 700r4 tv cable bracket
Post by: MrFiveOh on October 13, 2016, 06:44:11 pm

I tried to explain before but was ignored. Bowtie Overdrive is the only company that makes the brackets with the correct geometry necessary when converting to a 700R4. Look at their page and do some reading ------ http://www.tvmadeez.com/