73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: NCali on October 09, 2016, 01:55:23 pm
-
2 wd 1/2 ton w air
I am replacing the heater core and I read the post in the tech section.
I removed the bolts on the inner fender to move it out of the way and it dont move
it looks like I am going to have to un bolt the fender because the inner fits inside of the fender
Also I cant even see the bolts I need to remove. Are they inside the ac evap housing?
-
Got it: so in the tech section :heater core removal: under the with ac instructions:
you might ad removing the inner fender well because you cant see the bolts going through the fire wall unless you do
-
Which thread were you looking at? Yes you need to remove the inner fender in order to access the bolts on the firewall.
-
tech section :heater core removal: under the with ac instructions:
once the inner fender is out there is plenty of room to do all kinds of stuff
-
Negative on removing the inner fender well. A swivel some tape to keep from rolling to much and 4 extensions you can get that nut off with out dropping the fender well or drilling holes
Sent from my SAMSUNG-SM-G870A using Tapatalk