73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: tonyb on February 26, 2017, 10:43:47 am
-
Bought the 78 with a drivetrain noise, still doing it but it is starting to bother me. It is a 78 3/4 ton 350 Full time 4 wheel drive. noise is under power coming from somewhere up front or middle, Wheel bearings are good. Big money to fix? Any thoughts?
-
Is it a whine, clicking, clunk, is there vibration?
-
could be a few things, could even be timing
-
First thought front axle u-joints, second thought is the slip yoke on the front drive shaft. So many possibilities.
-
Whine like wheel bearing but only under power and doesn't change when turning. Front differential?
-
take front driveshaft out and lock the t case. unlock the front hubs or remove if auto and tape a bag over the hubs. this will isolate the front from the rear.
-
Thanks