73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: kingmu on September 01, 2005, 11:01:00 PM

Title: '79 Picture Request
Post by: kingmu on September 01, 2005, 11:01:00 PM

I am in the final stages of getting my engine running! But I think I will be posting quite a bit the next few weeks!

Can someone please post a picture of the short tube that contains the starter wires? I think the tube attaches where the trans bell housing meets the engine, but I'm not sure.

Thanks!

Title: Re: '79 Picture Request
Post by: roundedline on September 06, 2005, 01:22:00 PM

That is where it goes.  I don't have a picture though.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Title: starter wire tube
Post by: Lt.Del on September 07, 2005, 03:21:00 PM

The top end of that tube should have a bolt hole on it.  ONe of the bell housing bolts or transmission bolts will go through that and hold it up.  The tube is mainly to keep the wires from frying on your exhaust manifold--it works well.

1979 Chevy Big 10 Pick up 383 Stroker
Andy
 

Edited by: SgtDel at: 9/7/05 2:22 pm