73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Electrical => Topic started by: robosmurf on July 24, 2017, 02:40:57 pm

Title: Spark plug boot style 454 tbi
Post by: robosmurf on July 24, 2017, 02:40:57 pm

I'm looking to get a set of make your own length plug wires for my 84 that has a engine swap to 454. What is the correct style boot? Just the long straight ones? Currently there's a notch in the boots to flex the cable to 90 degrees.

 I just ordered a set of the correct plug wire retainers, there was only 1 of 6 left and the wires are flopping everywhere.(https://uploads.tapatalk-cdn.com/20170724/332aa07d1de8d5c14a6e7d47457d620d.jpg)(https://uploads.tapatalk-cdn.com/20170724/0b8ebacf136833e961cedfaea7bdaa13.jpg)(https://uploads.tapatalk-cdn.com/20170724/20840bba4fa6cb5613fa4d69a9b17370.jpg)

Sent from my SM-G920V using Tapatalk

Title: Re: Spark plug boot style 454 tbi
Post by: Irish_Alley on July 26, 2017, 08:03:31 am

personally i would op for a wire set from autozone or something.
http://www.autozone.com/ignition-tune-up-and-routine-maintenance/wireset/duralast-wireset/40558_712909_0

theyre 8mm and they look like what you have on now. IMO theres no need for "make your own wires" unless you have a performance motor. even then most of the "performance" wires are only 8mm