73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: Roadrocket59 on December 12, 2005, 09:51:00 pm

Title: 1980 454 to 292 Engine Swap
Post by: Roadrocket59 on December 12, 2005, 09:51:00 pm
Can anyone tell me if it is just a matter of moving the passenger side mount forward or is there a different mount needed.  A photo of a 292 mount would be nice.  Thanks, John.

Title: Re: 1980 454 to 292 Engine Swap
Post by: roundedline on December 13, 2005, 10:17:00 am
John,
I think it is a different mount alltogether.  I have one at the house that I can take a pic of.  If you are talking about the mount that connects to the frame stand, those are the same.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Title: Re: 1980 454 to 292 Engine Swap
Post by: Roadrocket59 on December 13, 2005, 08:55:00 pm
Chris, if you could post a photo I would appreciate it.  I was at the dealer today and the computer lists a different part number but no diagram and no stock of course.  If I can't find one in the junk yards I'll have to make something.  Shouldn't be to hard if I had a picture to go off of.  Thanks, John.

Title: Re: 1980 454 to 292 Engine Swap
Post by: roundedline on December 13, 2005, 09:49:00 pm
Here is what is left of mine.  Hope it helps:

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Title: Re: 1980 454 to 292 Engine Swap
Post by: Roadrocket59 on December 14, 2005, 04:43:00 pm
Thanks for the photo Chris but it's the frame side of the engine mount that I'm trying to find the placement of.  Thats the bracket that bolts to the frame and the crossmember on the passenger side.  John.

Title: Re: 1980 454 to 292 Engine Swap
Post by: roundedline on December 15, 2005, 04:17:00 pm
hmmmm, don't have that one.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Title: Re: 1980 454 to 292 Engine Swap
Post by: mispagan1 on December 24, 2005, 10:10:00 am
how are ya im in australia and over here most of our chev trucks had 292 in them .........so i have done a few v8 swaps.........the frame bracket is the same just move it forward......we have to move them back......hehehe
check out our forum down under.....lots of pics and vids
and my burnout truck solid 78 c10 swb 350 6/71 blower current aussie burnout champion :hat

smokem.proboards43.com/index.cgi

danny smith

Edited by: mispagan1 at: 12/24/05 10:21 am