73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Electrical => Topic started by: Golf on October 03, 2017, 04:14:58 am
-
After getting the engine in running order, been moving on to interior. It's in really good shape, no rips on the seat, dash is cracked but has a carpet cover on top... anything electrical is in not so good shape...
The speedo - cable is unplugged in the cab hanging under the dash, cable is unplugged at trans
Temp gauge does not work... I bought a triple gauge set and installed the water temp sender where the factory was on the driver side head - works great
No dash lights - fuse is good - hooked new gauges to fuse as well and no lights for gauges... maybe headlight switch?
No turn signals... I can get one side to flash with hazard lights - but I don't even see the 4-way flasher in the fuse box WTH... parking lights work fine, high beam/low beam
No radio - doesn't even come on... looks like factory cassette
No interior lights, hoping it's bulbs
I have a mechanical oil gauge to hook up but I want to get copper tubing from advance first and I'm not sure where to install it
The factory oil press and volt gauges go to 0 when the headlights are switched on