73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: PBritty on November 21, 2017, 08:12:33 am
-
Good day!
I know many people don't like vent windows and I remember many a day driving around with my Dad in his trucks and wondering why there was a business card under the vent window latch (stopped the whistling of the wind thru the vent window), but I like them and I think it is one of the unique things about square bodies.
I made a couple of these this weekend as you cannot buy them new. I used 16 gauge steel a drill press and came pretty close. The good news is 90% of this is covered by window rubber. It also rivets into place.
If anyone is interested I have other DIY stuff on these windows.
Cheers, PBritty
-
What are you trying to say? Your picture requires a microscope to view.
-
Hey VZ,
I am only stating it is better off to make these as the originals were poorly designed and break easily. You can get them at a junk yard or used, but you will be fixing in the short-term.
Not sure on the picture, I reduced it to meet the minimums and this is what showed up.
thanks,
Patrick Britt
-
(https://uploads.tapatalk-cdn.com/20171122/a3304ea3198ba7ff368b0ad42be93940.jpg)
Sent from my iPhone using Tapatalk