73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: Mandolino on December 22, 2017, 09:08:59 am
-
Long story short just bought a 74 k10.
The thing was in bad shape it turned on but didn't idle decided to get a rebuilt qjet. A cheap intake manifold and some other small things to get it running. Installed it all took it to a shop to do the timing and carb adjustments runs like a champ. But the new intake doesn't have a spot for the divorced choke. So I want to install a manual choke.
Is there a specific kit? Or can I some how MacGyver a universal one to the brackets on the carb currently
-
any reason your not considering an electric choke?
-
Would just rather have one less thing to adjust every now and then
-
Once adjusted properly the electric choke should never need adjusting again