73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Seats and Restraints => Topic started by: AmericaMade on January 29, 2018, 06:41:40 pm

Title: Bench seat fit
Post by: AmericaMade on January 29, 2018, 06:41:40 pm

Have an 83’ scottsdale c10. Looking to put a bench seat in. Will a 77’ seat fit? This is the 77’ seat
(https://preview.ibb.co/dUAoDm/32_A6_BC6_B_32_B9_415_D_8829_7_C6_D0_CF1_F5_E3.jpg)
(https://preview.ibb.co/kuMvtm/F4_E01669_C7_E2_445_B_8157_FD9_B75_AD0_EFD.jpg)

Title: Re: Bench seat fit
Post by: zieg85 on January 29, 2018, 08:27:22 pm

can't see the pictures but if it is a stock seat from a 1977 into a 1983, yes it will bolt in.  The drawbacks are the seat belts would go between the seat back and bottom, not through the bottom like the 83.  Now the belts will be tight and if you need the seat up at all or you not skinny you may not get the belt buckled.

Title: Re: Bench seat fit
Post by: Rapid Roy on January 29, 2018, 08:28:43 pm

No pics to see. Welcome to the site.

Title: Re: Bench seat fit
Post by: AmericaMade on January 29, 2018, 08:50:21 pm

https://ibb.co/mSwTDm
https://ibb.co/jdoKKR

Another image host hopefully this works.
I have 94’ suburban seats in it presentyl and theyre fine. But I want thr bench seat I prefer that look. I bought it with the suburban seats, so...

Title: Re: Bench seat fit
Post by: AmericaMade on January 30, 2018, 02:04:13 pm

Quote from: zieg85 on January 29, 2018, 08:27:22 pm

can't see the pictures but if it is a stock seat from a 1977 into a 1983, yes it will bolt in.  The drawbacks are the seat belts would go between the seat back and bottom, not through the bottom like the 83.  Now the belts will be tight and if you need the seat up at all or you not skinny you may not get the belt buckled.

I uploaded a new pic... if you say it will work Im going to go for it. I gather the bolt pattern is the same from 73-87

Title: Re: Bench seat fit
Post by: zieg85 on January 30, 2018, 02:10:52 pm

it will bolt in and sit correctly

Title: Re: Bench seat fit
Post by: Irish_Alley on February 01, 2018, 03:14:03 pm

fixed the top post so you can see the images without clicking on the link. click "modify" to see what i did. but i right clicked on the image then copied the image address and put that in the image code