73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Wheels & Tires => Topic started by: JonStrobel on April 04, 2018, 09:33:51 am

Title: 22x9 BS Issue on 86 C10
Post by: JonStrobel on April 04, 2018, 09:33:51 am

Looking for a little insight here.  1986 Sierra 1500,  Pancaked front cross member, PB 1inch narrowed, 1 inch forward control arms, 3 inch drop spindles, Z to get the frame rails on the ground.  Really want to run the Detriot Steel Wheels Delray in 22x9.  The largest backspacing they can make in a 22 is 4.5  I know I should be looking for 5.5ish but with the narrowed arms, any chance they'll clear the fenders.  Haven't run a wheel this large, any opinions and experience appreciated.

Title: Re: 22x9 BS Issue on 86 C10
Post by: Rapid Roy on April 04, 2018, 11:06:43 am

Welcome

Title: Re: 22x9 BS Issue on 86 C10
Post by: JonStrobel on April 04, 2018, 06:28:56 pm

Thanks.

Title: Re: 22x9 BS Issue on 86 C10
Post by: VileZambonie on April 05, 2018, 01:26:25 pm

This is your best bet after making such drastic changes

https://www.youtube.com/watch?v=ug3uLNL3aGc

http://www.jegs.com/i/Percy's/760/01201/10002/-1?CAWELAID=1710534765&CAGPSPN=pla&CAAGID=44693592161&CATCI=pla-176539549511&CATARGETID=230006180039217141&cadevice=c&gclid=EAIaIQobChMIrbO2neCj2gIVSbbACh3EjgFjEAYYASABEgLtKvD_BwE