73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: Ronno6 on April 06, 2018, 11:27:53 am

Title: 84 C10 clutch rod hole locatioin
Post by: Ronno6 on April 06, 2018, 11:27:53 am

I have seen a few old threads on the topic, but I am unable to view any photographs.
I am converting my '84 Chevy C10 from automatic to 4 speed, and
need the location of the hole for the clutch linkage to pass thru the firewall/floorboard.
Is there a way to convey this dimessionally?
Or, can someone provide a photo,please?
Is there a dimple or other marker present on the body ?
Do I need to do something in order to view photos?

Thanks.

Title: Re: 84 C10 clutch rod hole locatioin
Post by: zieg85 on April 06, 2018, 12:21:11 pm

There are 2 dimples in the cab, best seen if you peel back the insulation and floor covering around the steering column area

Title: Re: 84 C10 clutch rod hole locatioin
Post by: Ronno6 on April 06, 2018, 01:35:58 pm

Quote from: zieg85 on April 06, 2018, 12:21:11 pm

There are 2 dimples in the cab, best seen if you peel back the insulation and floor covering around the steering column area

Thanks.
I looked there and found 3 dimples.
Makes sense as the boot has 3 mounting holes.

Was this a test??
Thanks again!

Title: Re: 84 C10 clutch rod hole locatioin
Post by: zieg85 on April 06, 2018, 01:56:43 pm

Was this a test??


you passed