73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Heating, Ventilation & Air Conditioning (HVAC) => Topic started by: Neighbor Beast on April 08, 2006, 05:55:00 pm
-
i need ac in my 1987 350 with efi this is the old one



The new one will this fit and work? its form a 1989 chevy with a 350 also

Houston > You
-
So what is your question? Is the compressor not engaging? Air too warm? Leak?
SgtDel
-
Looks like the belt will track and it would more than likely work.Just don't know what that lump on the front of the pulley does.
Must be a newer improved clutch.
Edited by: 123 pugsy at: 4/8/06 10:11 pm
-
Yeah, that lump in front is the clutch mechanisms....if it doesnt engage, sometimes a tap on the front of that will engage it...if it is a clutch problem. I believe the last pic is of an older type.
SgtDel Edited by: SgtDel at: 4/8/06 10:48 pm
-
Hey Del.You missed 1 sentence between the photos.The bottom is from an 89 and the top one (an 87 is toast).He needs to know if the newer one will work as in: proper size for his 87 system,lines hooking up,charge type........
-
Ah, thanks pugys...good eye
Yeah, it should work...if the bolt holding the two lines in back bolts into the compressor, and the mounting brackets fit....go for it.
SgtDel
-
yea the bolting is the same .thanks for the quick response guy's ima put it on today texas heat is somethign else
Houston > You
-
make sure you prime the compressor....w/ the correct oil...i use the dyed stuff --easy to see leaks.
SgtDel