73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: Rtlane on July 31, 2019, 10:55:29 am

Title: Spray paint marking too easy
Post by: Rtlane on July 31, 2019, 10:55:29 am

I test painted an old inner door panel with only canyon black satin rustoleum 2x painters mark spray paint. When I do the final permanent paint job on my actual panels, i’ll be using adhesion promotor, then the black paint, then clear.

It has been a week since i painted and the test panel is easily marked with light fingernail scratch (see photo). What is the cause or is it because I didn’t clear?

(https://uploads.tapatalk-cdn.com/20190731/dc449764b8c22004a5d2dc24443e7f18.jpg)



Sent from my iPhone using Tapatalk

Title: Re: Spray paint marking too easy
Post by: zieg85 on July 31, 2019, 12:33:24 pm

Clear will help however if you want it durable consider a 2K urethane.

Title: Re: Spray paint marking too easy
Post by: Gric on January 16, 2021, 07:15:05 pm

I would suggest using the rustoleum vinyl dye. Works very nice with proper prep.

Title: Re: Spray paint marking too easy
Post by: VileZambonie on January 18, 2021, 06:43:26 am

Use vinyl & fabric paint instead or check out SEM paints.