73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Wheels & Tires => Topic started by: miket007 on December 06, 2020, 10:31:44 pm
-
Hey Guys...I am looking to go with some old school slotted mags...the US Mags indy...15X9 on the front and 15X10 in the rear....78 C10 2wd Big ten. The 15X9 shows a -12 offset 4.5 backspacing...test fitting one, I find the outer part of the tie rod end at the knuckle just barely touches the inside of the wheel....seems like 1/16" clearanced off the rod end end would make it fly.
Anyone have experience using the 15X9 4.50 on the front, 15X10 3.50 on the back?
-
i personally havent run anything that wide on any of my trucks, but if you just need a 16th you could get an 1/8 inch spacer for the front that would slide on the wheel mounting surface between the rotor and the wheel.
these are like 10 bucks at summitt
Allstar Performance ALL44125 1/8" Steel Wheel Spacer