73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: ToreyC on April 06, 2023, 10:38:29 pm
-
I’m wanting to see if anybody has ever taken a front axle from a 1 ton dually and installed it on a single rear wheel c10. I have converted my c10 long bed to a 4wd and want to run 1 ton axles. I already bolted up the 14 bolt rear end and I have the 1 ton front end, just need to know if it’ll work. I was told I’d just have to have the hubs machined down to accept a normal rim vs the dually rims. Thanks in advance for any input.
-
Apparently you can machine down the dually adapters, but usually you just buy SRW hubs. The only difference in the axle is at the hub. Dually's usually do have a larger outer bearing and have a higher weight rating because of it. However, the D60 difference is just the hubs.
-
Great to know. I appreciate that information!