73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: zooracer on September 29, 2004, 12:46:00 pm

Title: shifting to low 4x4
Post by: zooracer on September 29, 2004, 12:46:00 pm

I have an 81 with the full time hubs.  
I can easily shift down to 4 high, but it will not go down from there to 4 lo.
Any suggestions?
matt

Title: Re: shifting to low 4x4
Post by: bigblue86 on September 29, 2004, 09:45:00 pm

did you check your linkage at the transfer case?
I used to have a 79 blazer with full time and the linkage got loose once and gave me similar problems

Title: Re: shifting to low 4x4
Post by: zooracer on September 30, 2004, 09:13:00 pm

Ok, will check the linkage out.  Maybe just try to adjust it...
Thx

Title: Re: shifting to low 4x4
Post by: biggmcguy on November 27, 2004, 12:08:00 am

make sure that when you shift to 4 lo that the tranny is in neutral