73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Transfer Cases and Front Drivelines => Topic started by: js9234 on March 17, 2006, 04:37:00 pm

Title: np208 27 spline to 32 spline
Post by: js9234 on March 17, 2006, 04:37:00 pm

I need a np208 with 32 spline but all I can find is 27 spline. My casing is just cracked and everything else is good. Can I use a 27 spline transfer case and put the spline shaft(whatever it's called) on from mine to make it 32 spline?  

Title: Re: np208 27 spline to 32 spline
Post by: 1976Scottsdale on March 17, 2006, 09:59:00 pm

I would think that the case itself would be the same, but I cannot be 100 percent certain.

Title: Re: np208 27 spline to 32 spline
Post by: Blazin on March 17, 2006, 11:41:00 pm

Yes they are the same. While your in there it wouldn't hurt to put new bushings and bearings in as well mabey even a chain. I buy my 208 kits from Trans Star in Salem N.H. The last one I bought with a chain If I remeber correctlywas around $150. They are pretty easy to rebuild. I don't have one puller but a budy of mine that works at a machine shop does so I have him pulll and press one of the bushings in the case. the rest are all push through, and push in.

Edited by: Blazin at: 3/28/06 6:56 am

Title: Re: np208 27 spline to 32 spline
Post by: k30bb468 on March 27, 2006, 11:45:00 pm

I have one I'll sell ya
How about $100 + shipping