73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: ammmotroop on December 22, 2003, 11:09:00 pm

Title: transfer case
Post by: ammmotroop on December 22, 2003, 11:09:00 pm

I have a 85 K10. What type of transfer case should i have . It is 350 Auto. Also it is starting to leakso i think it needs a rebuild or something along those lines. How much is a fair price from a tranny shop for that type of work.

Title: Re: transfer case
Post by: 73K20 on December 23, 2003, 06:31:00 am

I would say that you should have a NP 208 which is an aluminum cased chain drive t-case.  I would estimate a rebuild of it to be around $800.  I doubt however that you need a rebuild of it, probably just a seal and gasket kit.

1973 K20 - 350/465(as of 10-04-03)/205

Title: Re: transfer case
Post by: Txstruck on December 24, 2003, 05:35:00 pm

Are you serious? $800!!!     Where are you getting your info?

PART NUMBER
PER UNIT
DESCRIPTION
TYPE
YEARS
COST

K203000 1
Rebuilder Kit - Bearings, Gaskets, Small Parts and Seals   1973-79
$227.67 see the kit

K203900 1
Overhaul Kit - Gaskets, O'Rings and Seals   1973-79
$56.26

201203 1
Adapter to Case Gasket Except Ford 1973-79
$2.24

201203F 1
Adapter to Transfer Case Gasket Ford 1973-79
$2.62

201203A 1
Input Bearing Retainer Gasket All 1973-79
$.96

301236 1
Power Take-Off Cover Gasket All 1973-79
$1.98

201052 2
GM Adapter Seal with Automatic 2.000 X 2.623 Various
$6.00

201023 2
GM Adapter Seal with Standard (Not in Kit) 1.375 X 2.250 Various
$7.36

201032 1
Input Gear Seal - Double-Lip 1.938 X 2.686 Various
$6.80

201050 2
Input Gear Seal - Use Back to Back 1.938 X 2.686 Various
$3.60

201057 1
Front Output Shaft Seal 1.750 X 3.061 Various
$12.00

201027 2
Ford F & R Output Shaft Seal 1.875 X 3.061 Various
$6.00

201059 1
Rear Output Shaft Seal 2.125 X 2.750 Various
$6.50

301515 1
Inputshaft Ball Bearing   1973-79
$24.64

301523 1
Front Output Shaft Ball Bearing   1973-79
$19.34

301515 1
Mainshaft Ball Bearing   1973-79
$24.64

301523 1
Rear Output Shaft Ball Bearing   1973-79
$19.34

201901 1
Oil Pump Gear 5 teeth - 38 spline - 1/2" wide White Nylon 1973-79
$18.94

201403 1
Small Parts Kit Included in K203000 1973-79
$83.23

203888 1
Drive Chain 2.5" Wide - 49 Links 1973-78
$199.59

203888A 1
Drive Chain 2.0" Wide - 36 Links 1978-79
$155.75

ALT-501   Part Time conversion kit no front wheel hubs (light duty) 1/2, 3/4 & 1 ton Ford, GM & Dodge 1975-79
$74.00

ALT-502   Part Time conversion kit with front wheel hubs (light duty) Ford, GM & Dodge 1/2 ton 1975-79
$176.00

ALT-95.92203/402   Part Time conversion kit with front wheel hubs (heavy duty) GM & Ford 1975-79
$449.00

ALT-75.32203/402   Part Time conversion kit with front wheel hubs (heavy duty) Dodge 1975-79
$449.00


P.S. Here is the URL if you wanna check them out.

www.drivetrain.com

Edited by: Txstruck at: 12/24/03 5:36 pm

Title: Re: transfer case
Post by: 77bowtie on December 30, 2003, 07:51:00 am

I must of missed where the labor charge for the rebuild is listed. Thats gotta make the prices higher.

Title: Re: transfer case
Post by: Txstruck on January 02, 2004, 09:55:00 am

Wouldnt worry about the labor costs. They are to easy to rebuild.