73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: biggmcguy on November 27, 2004, 01:05:00 am

Title: Speedo Cable Problems
Post by: biggmcguy on November 27, 2004, 01:05:00 am
My 79 chevy k10 has a major problem breaking speedo cables. It has an np203 init. Anybody got any ideas on how to fix this prob??

Title: Re: Speedo Cable Problems
Post by: de generaal on December 28, 2004, 11:07:00 am
i,ve had the same problems!,this could be the sollution, look behind the meter/speedo maybe its not fully locked most of these problems are there( your gear on the transfer case is oke?) because the space between the outer cable and inner cable is too small(on the upper side) this was in my case regards and a happy New Year!!
patrick.:rollin  

Edited by: roundedline at: 12/28/04 1:34 pm
Title: Re: Speedo Cable Problems
Post by: 4X4GMCGUY on January 08, 2005, 04:20:00 pm
do you mean the cable being fully locked into the speedo.???:\  

Title: Re: Speedo Cable Problems
Post by: roundedline on January 10, 2005, 09:01:00 am
There is a clip on the back of the speedo that holds the cable from falling.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project