-
1986 Chev K10 Long Bed
I'm in the beginning stages of rebuilding this truck, many more questions to come. I'm going to swap in a 14 bolt full floater rear and a dana 60 front. Any info from anyone who has done this would be appreciated. From what I remember the dana 60 should only require the proper spring pads and U-bolts. However I believe 14 bolts out of 1-tons have a different spring pad spacing. I'd rather not have to Curt off and moved the pads, can I use different mounting bracket to mount the springs to the frame? Again any help would be appreciated.
jeff
-
What is the 14Bolt out off?
If it is from a 1T or 3/4T pickup it will bolt in. If it is from a dualies or a van, these are the ones that have different overall widths from regular pickups and Blazers, and the spring perches are in different locations.
You want one with the leaf-spring centering-pin holes 42-3/4 inches apart. Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project