73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: DainBramaged on March 22, 2006, 03:31:00 pm

Title: Will 91 Blazer Interior fit 82 GMC Pickup?
Post by: DainBramaged on March 22, 2006, 03:31:00 pm

I know someone that is parting a 91 Blazer and I am trying to make sure the parts are interchangable.

82 bench seats for 91 blazer bucket seats and center console

82 dash for 91 blazer dash

82 headliner for 91 blazer dash

thanks in advance!

Title: Re: Will 91 Blazer Interior fit 82 GMC Pickup?
Post by: roundedline on March 22, 2006, 02:39:00 pm

The blazer seats won't work in the pickup or vise versa.  Blazers have flat floors where pickups have the gas tank hump in the floor.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Title: oops!
Post by: DainBramaged on March 22, 2006, 08:33:00 pm

I wrote "82 headliner for 91 blazer dash"  it should have stated 82 headliner for 91 blazer headliner.

Roundedline, someone else told me the seats would fit... however what you said makes sense!  Anywhere on the net that has a rundown on what pieces will fit what years?

Title: Re: Will 91 Blazer Interior fit 82 GMC Pickup?
Post by: Blazin on March 23, 2006, 05:34:00 am

Seats won't interchange.
Dash will interchange.
Headliner won't interchange.
As far as I know there is no list for intechange parts. Pretty basic though, if it looks the same it will interchange for example the dash pad, gauge face trim, doors forward on the body. Or if it looks diferent it will not seats, headliner, etc.  

Title: Re: Will 91 Blazer Interior fit 82 GMC Pickup?
Post by: roundedline on March 23, 2006, 11:54:00 am

On a Blazer, the only thing that will interchange interior wise is the Dash area, and the door panels.  

On a Suburban, Dash area, door panels, seats, and console.

Whomever told you the seats would work were incorrect.  The seat on the passenger side for pre 87 Blazers only tip forward......  IF you had some brackets from a Burb or Pickup the actual seat would work, otherwise you have to make some mounts.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Title: confused a little
Post by: Hardy Restoration on March 23, 2006, 11:25:00 pm

So are you saying that a seat from a burb will work in an 85 Chevy truck?  I thought in the burbs the gas tank was in the rear, causing there to be no floor humps.  Could be wrong.  Anyone know?  Thanks

Title: Re: confused a little
Post by: roundedline on March 24, 2006, 08:22:00 am

Yes a seat from a burb will work with some bending in a pickup.  The burb has simular humps in the floor just like the pickup.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Title: Windshield
Post by: DainBramaged on March 24, 2006, 11:04:00 am

I have a cracked windshield and need to get one from the junkyard.  Are they all the same?