73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: mrcustom on April 30, 2006, 09:31:00 pm

Title: windshield woes
Post by: mrcustom on April 30, 2006, 09:31:00 pm

my truck is an 86 k20.The wind shield leaks.It was replaced a few years ago and has leaked ever since. It needs to be replaced again But I want to solve this problem. This windshield looks rounder in the corners that the frame so the seal is pulled away from the frame.
Any ideas ?

Title: Re: windshield woes
Post by: Blazin on May 01, 2006, 08:13:00 am

Sounds like it may not be seated all the way. I would recomend a new gasket this time around.  

Title: Re: windshield woes
Post by: OKUMA111 on May 01, 2006, 08:48:00 pm

HAS BODYWORK EVER BEEN DONE AT THE EDGE OF THE WINDSHIELD, EXESSIVE BODY WORK MIGHT NOT LEAVE THE GASKET TO SEAL PROPERLY! I AGREE TRY CHANGING THE GASKET THIS TIME.