73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: maxwell75c10 on May 26, 2006, 12:01:00 pm
-
I have a 1975 c10 350, and my horn dosen't work.
I put in a new relay, pluged the horn in, and checked all the fuses. any advice? or could some one tell me where a wireing diagram is. thanksShow results
-
Every once in awhile on my 75 c20 the horn doesnt work but its a lose conection right where the wires go into the horn. I ussally can just pop the hood and push the wires towards the horn and it's good to go for a while. If that doesnt work hook and electric meter or smth t o see where u lose power at- see if u do have power at the plug by the horn or if u lose it at the fuse box.
-
You can run a jumper lead straight from the pos. terminal on battery to the horn and see if you hear anything....put your ear right up against the horn when you do this

SgtDel
-
I'll bet the horn is just shot. They may look pretty good on the outside but messed up inside. I have taken some off before that looked good but turned it upside down and rust came out