73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Electrical => Topic started by: zach791 on March 20, 2007, 08:52:00 pm

Title: Fuse Panel Diagram
Post by: zach791 on March 20, 2007, 08:52:00 pm

Does anyone have the diagram or a picture of their fuse cluster. and the wires running to it... my little brother decided to help me out and unpluged everything from the inside of the cab fuse panel and there are some wires that plug into it and i dont remember their placement exactly. It is on a 1983 chevy k10 with a/c and power windows and locks

Title: Re: Fuse Panel Diagram
Post by: roundedline on March 21, 2007, 02:02:00 pm

Have you checked AutoZone for a Haynes Manual.  There are complete wiring schematics in them.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Title: Re: Fuse Panel Diagram
Post by: zach791 on March 21, 2007, 07:13:00 pm

Yea i have a Chilton repair manuel for it but it does not show fuse placement. I just thought if the right person seen this post it would save me a little time.  

Title: Re: Fuse Panel Diagram
Post by: Tire Burner on March 22, 2007, 07:54:00 am

There's this site: brochures.slosh.com/index.shtml?1986

It's not a Mainstream thing, but the Diagrams are Accurate. You might even want to print out yours for future wiring problems.

Title: Re: Fuse Panel Diagram
Post by: VileZambonie on March 23, 2007, 02:22:00 pm

I just posted this in another thread

(https://drive.google.com/uc?id=1mTlcuMWW437eycrEYv1AETBbjqiHYCWU)

*edited out failbucket image

Title: Re: Fuse Panel Diagram
Post by: MrBowtie95 on October 11, 2011, 06:21:55 pm

which of these can be used for a constant 12V power supply, other than the battery

Title: Re: Fuse Panel Diagram
Post by: VileZambonie on October 11, 2011, 07:40:32 pm

BAT

Title: Re: Fuse Panel Diagram
Post by: MrBowtie95 on October 11, 2011, 07:48:45 pm

are their any other locations other than the BAT. It's going to be for a stereo and I need something that won't stay on all the time.

Title: Re: Fuse Panel Diagram
Post by: VileZambonie on October 11, 2011, 07:51:24 pm

You just said constant 12V power

Title: Re: Fuse Panel Diagram
Post by: MrBowtie95 on October 12, 2011, 06:18:25 am

Somebody told me there was a cigarette lighter block that was always hot until you cut the key off

Title: Re: Fuse Panel Diagram
Post by: Irish_Alley on October 12, 2011, 08:48:31 am

then its not “always” hot its a key or switch hot. but most of them are that, constant they are usually stop/hazard lights

Title: Re: Fuse Panel Diagram
Post by: VileZambonie on October 12, 2011, 06:25:37 pm

Constant means hot at all times. If you want a switched source use IGN

Title: Re: Fuse Panel Diagram
Post by: slammed79 on October 19, 2011, 06:27:45 am

You'll use a constant hot and ignition hot for a stereo install. The constant will keep your clock and settings from deleting every time you turn the key off.

Title: Re: Fuse Panel Diagram
Post by: Captkaos on October 19, 2011, 04:25:28 pm

Just a follow-up to this post that got pulled back up from 2007, All of the Wiring diagrams are available in the Tech section of the forum.