73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: jnmac on May 07, 2007, 08:48:42 pm

Title: wireing
Post by: jnmac on May 07, 2007, 08:48:42 pm

ok guys im kinda in a bind i think i have a 84 cab with a 84 wireing. but under the hood its 79. will this work? and if so what do i have to do to get the lights to work right? seeing that im gong from a two head light to four . well thanks alot

Title: Re: wireing
Post by: VileZambonie on May 07, 2007, 08:59:11 pm

Just use the wiring harness from the 84

Title: Re: wireing
Post by: jnmac on May 08, 2007, 07:39:35 pm

well see im trying not to because two reasons one its cut up pretty good and the 79 one is still clean and uncut and on the motor. granted i could use the one from the 79 to fix the 84 but it seem like it would be better/ eazyer to use the 79

Title: Re: wireing
Post by: DrPepper1010 on May 09, 2007, 06:52:33 pm

I went from 2 to 4 headlights on my 82. All I did was cut the 2 pin high beam headlight connector and about 12 inches of wire from a donor truck. One wire is green (the hot wire) and one is black (ground). Then splice this socket into your 2 beam (low and high) headlight wiring. That's all that is to it. Mine works fine.
Good Luck

Title: Re: wireing
Post by: jnmac on May 09, 2007, 08:58:53 pm

thanks alot that helps