73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: 10k plus on May 10, 2007, 11:24:29 am
-
Hey all my name is Mike from Calgary Alberta Canada. I have a 1976 chev 3/4 ton 2wd that is my new project. Now i don't really need the 3/4 ton axles ect, so here is my question (May be sacralige (sp?)) what would i need to swap to a 1/2 ton axle and front end? I heard a roumor that it is the same frame as a 1/2 ton just with beffier suspension and axle(s). any help would be awesome thanks - Mike
-
what are you trying to eliminate by going to 1/2T running gear? As in why are you wanting to change.
A lot of 1/2T (HD and Heavy Halfs) utilized the same rear springs as a 3/4T just not the axle.
The front are esentially the same short of the HD bushings in the control arms. I "think" the tierod ends are different also.
Can it be done, yes. simple solution is replace the rear axle and the front suspension from control arms out...
-
well I got the truck for a good price but the rear has to come out anyways sooo since its a 2wd its gotta get lowered and seeing a 8 lug slammed ride will look kinda goofy. Besides i can use the 14 bolt in my future jeep.Thanks
-
Welcome from New Hampshaa.