73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: 83SN on June 20, 2007, 08:18:12 am

Title: th400 kickdown
Post by: 83SN on June 20, 2007, 08:18:12 am

Having installed a th400, wiring the kickdown, attaching the part to the gas pedal, when i push the pedal all the way down, it does not touch the bolted on part.  Would i need the pedal assy from the donor vehicle?

83 Chevy S/N
454, 400....(almost ready)!!!

thanks
willie

Title: Re: th400 kickdown
Post by: ccz145a on June 20, 2007, 09:12:38 am

Going from memory here... I believe you pull back the spring loaded plunger on the switch and let go. Worked last time I did it, 15 years ago. and still downshifting haven't had to touch it since.

Good luck.

Title: Re: th400 kickdown
Post by: joesgarage71 on June 20, 2007, 05:28:39 pm

 If the arm isn't working the switch at or near WOT than something isn't right.Let me see I should have a pic somewhere.

Steve