73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: mikewb on June 27, 2007, 02:47:51 pm

Title: electri windows
Post by: mikewb on June 27, 2007, 02:47:51 pm

on an electric door does anybody know how i can wire it to work if my truck didnt come with power windows. as in which wires are for the drivers door and what does what.

Title: Re: electri windows
Post by: VileZambonie on June 27, 2007, 03:02:18 pm

you can either run a donor harness or run the wires yourself. Just print out the schematic and then physically measure out what you'll need.
(http://i6.photobucket.com/albums/y228/Sabaka454/windows-1.gif)

Title: Re: electri windows
Post by: mikewb on June 27, 2007, 03:09:33 pm

where should i run the wires to?

Title: Re: electri windows
Post by: Captkaos on June 27, 2007, 05:24:36 pm

As in where to power them from?  The fuse panel.  If you find one in the salvage yard, you can pull the power window/lock harness out.  It is an additional circuit for these trucks.

Title: Re: electri windows
Post by: mikewb on June 28, 2007, 01:43:23 pm

the orange, blue , and black wires go to the drivers door. which ones go to power and which ones to ground?

Title: Re: electri windows
Post by: Captkaos on June 28, 2007, 02:23:06 pm

76 Pink goes to the fuse box, 150 black goes to the bus bar ground.  (It is on the drivers side a pillar behind the dash.)